![]() ![]() The system was a bit of an intermittent booter, with the occasional hang. This was one of them, which makes for an easy fix. Earlier SATA cables did not have a captive tab to keep them locked in place and some connectors do not have the necessary holes for such tabs to engage. This can happen because of the residual stress in a SATA cable pulling on the connection and a slight bump (e.g. The first was the simplest – a case of a drive not detecting at all which was tracked down to a SATA cable coming “undone” from the motherboard side. This month, I’ve actually been plagued by four SATA cable “failures” of sorts. ![]() Unfortunately, they are not without their occasional issues. ![]() Compared to the 40-pin, 80-conductor IDE cables that came before them, SATA connections are so much easier to deal with, being point-to-point with no configuration required and using much less insertion force. The thin “liquorice strap” twinaxial cables with a rectangular cross section, frequently pinky-red in colour but sometimes grey or blue, are a common sight. For the most part, we are starting to say goodbye to SATA on most modern computers, although it is still the primary means for hard drives and older SSDs to connect. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |